3 Pin PCB Terminal Block 3.5mm Pitch 10A Rating 5V DC This ribbon cable is made

This ribbon cable is made up of 2 Single -strand wires in Red & Black

Pin Number Pin Name Description 1 Switch Collector Collector pin of Internal transistors (Output Voltage pin) 2 Switch Emitter Emitter pin of Internal Transistors 3 Timing Capacitor Connect to a capacitor which decides the switching frequency 4 Ground Connected to ground 5 Comparator Inverting Input Used to set the output voltage 6 Vcc Input voltage is fed to this pin 7 Ipeak Sense Used to set the output current 8 Driver Collector Collector pin of switching transistor

SMD resistors in the 0805 package have a greater voltage rating

Resistance 10k ohm (103) Brand Resistor Chip size 1206 Tolerance 5% Power 1/4W Temperature Range -55°C to +125°C Mounting Type Surface mount No

long-lasting and dependable

3 Pin PCB Terminal Block 3.5mm Pitch 10A Rating 5V DC This ribbon cable is madeTerminal blocks (also known as screw terminals) are electrical connectors that allow you to connect wires in the same circuit without cutting or splicing them. Screw with 3 pins. The Terminal Block is a multifunctional and small terminal block. It's used to connect wires to the circuit board. The terminal block's small size allows it to connect two conductors on a PCB where space is at a premium. The wires are held in place by screws on this terminal